Bể gia nhiệt tuần hoàn có chương trình, 10 lít

Giá: Liên hệ

Mã: CW-10P Danh mục: Từ khóa:

Mô tả

1. Tính năng kỹ thuật:

Bộ điều khiển chương trình hóa thông minh:

  • 10 programs available for temperature ramp up and dwell control.
  • 10 steps per a program and 99 hours 59 minutes per a step.
  • Stored programs are easily linkable.
  • Programs can be repeated up to 99 cycles.
  • Pre-heating and heating time are settable before program starts.
  • Microprocessor PID control / automatic tuning / auto run.

Tính năng vận hành:

  • +5℃ above room temperature to 150℃.
  • Three point temperature calibration.
  • Digital timer for delayed ON / OFF. (from 1 min to 99 hr 59 min)
  • Protection against over-temperature and low fluid level.
  • Digital input and output control function for interlocking external devices.
  • Colorful LCD display with interactive input system.
  • Keypad lock function prevents accidental changes during operation.
  • Splash-proof keypad.
  • RS-232 interface.(RS-232 to USB serial converter is provided.)

Cấu trúc:

  • Accurate, stable, and efficient temperature management by using a powerful variable-speed pump. (1 to 3 steps of the pump for internal circulation and 4 and 5 steps for external circulation)
  • Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
  • Protection against low fluid level and dry running by auto-matic shut down of the heater together with audible and visual alarms.
  • Corrosion-resistant, seamless, leak-proof, round-cornered, and easy-to-clean stainless steel reservoir with a drain valve.
  • Powerful pressure and suction pumps provide contrast pressure and flow rate throughout the whole temperature range.
  • Quick-release front grille for easy cleaning of the condenser.
  • Compact footprints ideal for cramped lab space.

2. Thông số kỹ thuật:

Model CW-05P CW-10P CW-20P CW-30P
Bath Volume (L / cu ft) 5 / 0.2 10 / 0.4 20 / 0.7 30 / 1.1
Working Temperature Range 2) (℃ / ℉) Amb. +5 to 150 / Amb. +9 to 302
Temperature Stability 1) (±℃ / ℉) 0.05 / 0.09 0.05 / 0.09 0.1 / 0.18 0.1 / 0.18
Pump Max. Pressure, Max. Flow Rate 5.9 PSI (406.8 millibar), 7.4 gallons / minute (28 liters / minute)
Max. Suction Flow Rate 2.6 gallons / minute (10 liters / minute)
Dimension Bath Opening / Depth
(W×L, D) (mm / inch)
150×99, 160
/ 5.9×3.9, 6.3
211×154, 180
/ 8.3×6.1, 7.1
290×214, 200
/ 11.4×8.4, 7.9
300×264, 230
/ 11.8×10.4, 9
Overall
(W×L×H) (mm / inch)
220×395×424
/ 8.7×15.6×16.7
281×450×444
/ 11.1×17.7×17.5
360×510×464
/ 14.2×20.1×18.3
370×560×494
/ 14.6×22×19.4
Net Weight (kg / lbs) 12.5 / 27.6 15 / 33 17.5 / 38.6 19.5 / 43
Requirements (230V, 50 / 60 Hz) 4.5A 6.7A 8.8A 8.8A
Cat. No. AAH52305PK AAH52315PK AAH52325PK AAH52335PK

1) Technical data according to DIN 12876.
2) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from
Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.
*Bath fluid : water

3. Cung cấp bao gồm:

  • Bể gia nhiệt tuần hoàn có chương trình 10 lít; Model: CW-10P; Code: AAH52315PK
  • Phụ kiện tiêu chuẩn
  • Tài liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt

Thông tin bổ sung

TÍNH NĂNG - ỨNG DỤNG

Bể tuần hoàn gia nhiệt

NHÀ SẢN XUẤT

Jeiotech – Hàn Quốc

XUẤT XỨ

Hàn Quốc